Measuring Data Wireless Import System
“Telemeasure”
Telemeasure II” is a wireless measured data importing system consisting of handy Transmitter and Data receiver.
The transmitter is designed to transmit measured data received from digital measuring devices.
The Data receiver forwards the measured data to the PC after receiving from transmitters.
“QCPRO EX” is an Excel Add-in software to read measured data directly from measuring device with Transmitter into Microsoft Excel.
Telemeasure and QCPRO EX enable to make inspection report based on Excel quick, correctly and easily.
“Telemeasure II“
“TelemeasureII” is a wireless measured data importing system consisting of handy Transmitter and Data receiver.
The transmitter is designed to transmit measured data received from digital measuring devices by worldwide common frequency 2.4GHz band.
Telemeasures Tools Introduction
Telemeasure II Data Receiver “DR-200U/R/D”
-
Transmission distance: 50m (depends on surrounding conditions)
-
Strengthen collision avoidance of radio waves
-
128 DR-200U/R/D's can be used at the same time.
-
Two-way communication (This function is unavailable in some countries.)
-
Worldwide common frequency
Specifications
-
Receiving frequency: 2.4GHz (worldwide common frequency)
-
Transmission distance: 50m (within sight)
-
Channel number: 128
-
PC output:
-
DR-200U；USB
-
DR-200R；RS232C
-
DR-200D；Digimatic/USB
-
Power supply:
-
DR-200U；USB Bus Power
-
DR-200R；AC100V～240V(DC9V)
-
DR-200D；AC100V～240V/USB Bus Power
-
Size: 116.5D x 72.7W x 25H mm
-
Weight: DR-200U/DR-200D; 82g DR-200R; 91g
Telemeasure II Data Receiver “DR-200mini”
-
Super-small compact design Suitable for notebook or tablet PC
-
Transmission distance: 20m (depends on surrounding conditions)
-
Reasonable price
*Available software: QCPROEX V4, QCPROMX, QCPRO V8
Specifications
-
Receiving frequency: 2.4GHz (Worldwide common frequency)
-
Transmission distance: 20m (within sight)
-
Channel number: 128
-
PC output: USB (USB cable attached)
-
Power supply: USB Bus Power
-
Size: W36×D53×H11mm
-
Weight: 20g
Telemeasure II Transmitter “TXG Series”
By using digital display of measuring instrument, only pushing buttons on Transmitter,
easy to set following functions.(Patent Pending)
-
Transmitter ID No. from 0 to 99
-
Set receiver (Channel) No. for Transmitter from 1 to 128
*Receiver No. for Data receiver must be set by PC. -
Two-way communication Data trigger function (max. 16 Transmitters) Reception acknowledgment or not (Buzzer sound or not)(Note) This function is unavailable in China.
-
Interval Transmission from 0.4sec. till 60 min.
Specifications
-
Transmission frequency: 2.4GHz
-
(worldwide common frequency)
-
Output power: 1mW (Specified low power)
-
Channel number: 128
-
Input signal: Digimatic or RS-232C
-
Power source: Coin battery CR2032
-
Size (except connector): 32D×52W×14H mm
-
Weight (except connector): 25.5g (Include battery)
Major Model Name of Transmitter & Applied Measuring Equip.
Manufacturer:Mitutoyo
Measuring Instrument : Caliper
Connector : Flat 5pin
Model Name : TXG-KCX/KCXQ*
Cassette type: TXG-KCX-CC
Available Digimatic micrometer/caliper for Cassette type transmitter
Measuring Instrument : indicator
Connector: -
Model Name : TXG-KCS/KCQ*
Measuring Instruments:H.eight Gauge
Connector: -
Model Name : TXG-KCM/KCMQ*
Manufacturer:Mitutoyo
Measuring Instrument : Micrometer
Connector : Round 6pin
Model Name : TXG-KA/KAQ*
Manufacturer:Mitutoyo
Measuring Instrument : indicator
Connector : Flat 10pin
Model Name : TXG-KE/KEQ*
Manufacturer:Mitutoyo
Measuring Instrument : Coolant proof Caliper/Micrometer
Connector : Square 5 pin
Model Name :
Cable/5pin Right angle TXG-KWX/KWQ*
Cable/5pin Straight TXG-KWXS/KWSQ*
Cassette type:
TXG-KWX-CC (for caliper)
TXG-KWX-CM (for micrometer)
Available Digimatic micrometer/caliper for Cassette type transmitter
Manufacturer:Mitutoyo
Measuring Instrument : Coolant proof indicator
Connector : Square 8pin
Model Name : TXG-KNX/KNQ*
Manufacturer:Nikon
Measuring Instrument : Counter
Connector : Special 20pin
Model Name : TXG-NDQ*
Manufacturer:Tonichi
Measuring Instrument : Torque wrench
Connector : Special 8pin
Model Name : TXG-RST
RS-232C output instruments
Connector : D-sub 9pin
Model Name : TXG-RS TXG-RS/RSQ* ⇒
Type of transmitter transmitting data by button on measuring device consumes much battery.
Some measuring device causes extreme voltage fall. Recommend to use “Power Supply Unit (PS2032)”.
“QC PRO“
“QC PRO” is software which automatically records,calculates and analyzes data and systemizes quality control enables to make correct inspection report, because this is automatic system avoiding read or transcription mistakes.And this system can save mass data compactly and search them quickly, therefore Realizes quality control with tracing data easily.
“QC PRO” realizes cost cut of quality control work,because it can reduce much time to make inspection reports or other documents.
Quality control software of standard database style Adopting SQL server, makes stored measured data to practical use.
